Intellijel Steppy 3U Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 37

Intellijel Steppy 3U Скачать руководство пользователя страница 16

/

Steppy 3U Manual

Select Mode

In   Select   Mode,   the   Multifunction   buttons   are   used   to   select   tracks
for   viewing   &   editing;   to   select   pages   within   those   tracks;   and   for
enabling/disabling   various   track   display   and   performance   options.

Note: Steppy can be in both Select mode (

yellow

LED) and Edit

mode (

red

LED) simultaneously. If you’re currently in Edit Mode

(discussed later), you can enter Select mode to select which track
you wish to edit.

1. SELECT button

Press   this   button   to   put   Steppy   into   Select   Mode.   The
yellow   LED   next   to   the   SELECT   button   turns   on   when
Select   Mode   is   on.   In   Select   Mode,   the   labels   with   the
black   backgrounds   correspond   to   the   buttons’   functions
(matching   the   black   color   of   the   SELECT   button).

If   pressed   and   released,   the   SELECT   button   functions   as   a
toggle   button   —   putting   Steppy   into   Select   Mode,   where   it
remains   until   the   SELECT   button   is   pressed   again   to   exit
Select   Mode.

If   pressed   and   held,   the   SELECT   button   functions   as   a
momentary   switch   —   temporarily   putting   Steppy   into   Select
Mode   while   you   press   the   desired   Multifunction   button.
Releasing   both   the   SELECT   button   and   the   Multifunction
button   automatically   exits   Select   Mode.   This   is   great   if   you
want   to   make   quick   on-the-fly   changes.   For   example,   if
you’re   currently   viewing   Track A   and   you   want   to   view
Track B,   simply   press   and   hold   the

SELECT

[1]

button

while pressing the

TRACK B

[2]

button. Release both

buttons   and   Steppy   returns   to   Play   mode   (which   will   now
be   showing   the   pattern   for   Track B)   without   remaining   in
Select   mode.

2. TRACK buttons

When in Select mode, these four buttons select which of
the four tracks (A, B, C or D) you wish to display/edit. A

yellow

button indicates the selected track.

Page 15

«
...
14
15
16
17
18
...
»

Содержание Steppy 3U






































Отзывы:

Нет отзывов