Intellijel Steppy 3U Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 37

Intellijel Steppy 3U Скачать руководство пользователя страница 13

/

Steppy 3U Manual

Buttons are

RED

in Edit Mode, with the red button in the right column indicating

the active parameter, and the red button(s) in the left column indicating the
parameter value.

Edit Mode is indicated when the red Edit Mode LED is lit. You can also tell you’re
in Edit Mode when (in general) most buttons are

RED

. See

for

detailed information.

2. SELECT button

- This button turns Select Mode on

and off.

In   Select   Mode,   the   MULTIFUNCTION   buttons
perform   the   tasks   indicated   by   the   labels   with   black
backgrounds   (visually   linking   them   with   the   black   color
of   the   SELECT   button).   The   yellow   LED   next   to   the
SELECT   button   turns   on   when   Select   Mode   is   on.

If   pressed   and   released,   the   SELECT   button   functions
as   a   toggle   button   —   putting   Steppy   into   Select   Mode,
where   it   remains   until   the   SELECT   button   is   pressed
again   to   exit   Select   Mode.

If   pressed   and   held,   the   SELECT   button   functions   as
a   momentary   switch   —   temporarily   putting   Steppy   into
Select   Mode   while   you   press   the   desired
MULTIFUNCTION   button.   Releasing   both   the
SELECT   button   and   the   MULTIFUNCTION   button
automatically   exits   Select   Mode.   This   is   great   if   you
want   to   make   quick   on-the-fly   changes.   For   example,
if   you’re   currently   viewing   Track   A   and   you   want   to
view   Track   B,   simply   press   and   hold   the   SELECT
button   while   pressing   the   “Track   B”   MULTIFUNCTION
button.   Release   both   buttons   and   Steppy   returns   to
Play   mode   (which   now   shows   the   pattern   for   Track   B)
without   remaining   in   Select   mode.

3. EDIT button

- This button turns Edit Mode on and off.

Edit   Mode   uses   the   right   column   of   MULTIFUNCTION
buttons   to   select   which   parameter   to   edit   (as   indicated
by   the   labels   to   their   right),   such   as   GATE,   CLK   ÷,   SWING,   etc).   Edit   Mode   uses   the   left
column   of   MULTIFUNCTION   buttons   to   adjust   the   selected   parameter   value   (with,   in

Page 12

«
...
11
12
13
14
15
...
»

Содержание Steppy 3U






































Отзывы:

Нет отзывов