Intellihot iN401, Руководство по эксплуатации и установке

Страница: 10 / 80

iN401 - iN501 Technical Specifications 6
May 2019 - Revision 00
3.2 Nomenclature
Gas Inlet
Air Intake
Exhaust Port
Pressure
Relief Valve
Hot Water Outlet
Recirculation Inlet
Cold Water Inlet
Drain
Hose
3.3 High Elevation Installations
For operation at elevations above 2,000 feet, the hot water
delivery capacity should be reduced by 4% for each 1,000
feet above sea level.
Clearance Requirements
In order for the water heater to operate properly and
efficiently, the clearances specified in the table below are
required .
12”
1”
1”
1”
6”
(top)
Service Clearances. If multiple units are installed, the side clearance can be
shared between the two units.
Location Required
From
Combustibles
From Non-
Combustibles
Service
Clearance
1
Top 6” (15 cm) 2” (51 cm) 6” (15 cm)
Back 5/8” (16 mm) 5/8” (16 mm) 1” (25 mm)
Sides 1” (25 mm) 1/2” (13 mm) 1” (25 mm)
Front 2” (5 cm) 2” (5 cm) 12” (31 cm)
Bottom 0” (0 mm) 0” (0 mm) 0” (0 mm)
1
Service clearances are required dimensions to allow for normal
service of the unit.