MP73P+ : Battery charger/analyser
Operators Manual
7.8
Performing A Capacity Test
7.8.1
Capacity Test or Discharge From A Library Entry
•
Connect the battery to be discharged and apply power to the unit.
•
From the
MAIN
screen select
DISCHARGE
followed by
LIBRARY
.
•
Using the
arrows move the high light to point to the battery.
•
Select
EXECUTE.
•
If a blank entry is selected the unit will warn that no data is exists.
•
The unit will display the charge data for checking.
•
To begin the charge select
START
or
TIMED
.
•
If printer fitted and battery serial number set to on, the battery serial number
will be requested at this point.
7.8.2
Capacity Test or Discharge From Manual Data
•
Connect the battery to be discharged and apply power to the unit.
•
From the
MAIN
screen select
DISCHARGE
followed by
MANUAL
.
•
Enter the discharge data as requested.
•
The unit will display the charge data for checking.
•
To begin the charge select
START
or
TIMED
.
•
If printer fitted and battery serial number set to on, the battery serial number
will be requested at this point.
7.8.3
Capacity Test or Discharge From Previous Data
•
Connect the battery to be discharged and apply power to the unit.
•
From the
MAIN
screen select
DISCHARGE
followed by
PREVIOUS
.
•
The unit will display the charge data for checking.
•
To begin the charge select
START
or
TIMED
.
•
If printer fitted and battery serial number set to on, the battery serial number
will be requested at this point.
8 Creating Or Modifying Library Entries
The Battery Charger Analyser has a set of built in user-defined battery charge and
capacity test parameters. The following procedure has to be observed to either enter
new items or modify existing entries or erase an entry completely.
•
From the
MAIN
screen select
CHARGE
or
DISCHARGE
•
Select
LIBRARY
.
•
Using the
arrows move the high light to point to the battery.
•
Select
DELETE
if you wish to remove this item from the library.
•
Select
if you want to make a hard copy of the item selected.
•
Select
MODIFY
to make changes to the selected item.
•
If the selected item is marked as
NO DATA
the name for this item will be
requested.
Doc: DWG1042-12-R18 MB73P+ Operators manual.odt
Page 39 of 64
Copyright Material of Intelligent Charging Limited © 2020
Printed On : 29/11/20