Intel SR1600UR - Server System - 0 MB RAM, Руководство по обслуживанию

Страница: 120 / 190

102 Intel
®
Server System SR1600UR Service Guide
Restoring the BIOS Defaults
If you need to restore the BIOS default settings, the BIOS Default jumper will need to be
used.
1. Power down the system; do not disconnect the AC power.
2. Open the server system. For instructions on removing the system cover, see
“Removing the System Cover” on page 38 .
3. Locate the BIOS Default jumper block at board position J1E7.
4. Move the jumper from the normal operation position (covering pins 1 and 2) to the
Set Default position (covering pins 2 and 3).
Figure 88. BIOS Default Jumper
5. Wait five seconds.
6. Return the BIOS Default jumper to the normal position (covering pins 1 and 2).
7. Close the server system.
8. Power up the system.
AF003113
J1E7
BIOS Default
2
3
Normal
Set
Default