Intel
®
Core™ 2 Duo Processor and Intel
®
Core™ Duo Processor with Intel
®
E7520 Chipset Development Kit
January 2007
User’s Manual
Order Number: 316068-001US
21
Intel
®
Core™ 2 Duo Processor and Intel
®
Core™ Duo Processor with Intel
®
E7520 Chipset
Development Kit
4. Plug the fan connector to the fan pin header J5D2 on the board.
Note:
The heatsink removal process is the reverse of the installation procedure.
2.5.9
Installing Memory
The kit includes two 512 MByte registered ECC DIMMs. To install, ensure the tabs on
the slot are open, or rotated outward from the slot. Line up the DIMM above the slot
(the DIMM is keyed so that it only fits in the slot in one orientation). Firmly but carefully
insert the DIMM into the slot until the tabs close. Repeat for all other DIMM and slots.
Note:
When populating both channels, always place identical DIMMs in sockets that have the
same position on channel A and channel B (i.e., DIMM A2 should be identical to DIMM
B2).
Note:
Populate DIMMs starting with the sockets farthest away from the MCH (DIMM slots A2
and B2).
Caution:
Do NOT bend the board when installing memory. There are a large number of
components near the memory slots and excessive board flex can lead to solder joint
failure.
Figure 12. Heatsink Fan Connector