Intel
®
Core™ 2 Duo Processor and Intel
®
Core™ Duo Processor with Intel
®
E7520 Chipset
Development Kit
Intel
®
Core™ 2 Duo Processor and Intel
®
Core™ Duo Processor with Intel
®
E7520 Chipset Development Kit
User’s Manual
January 2007
12
Order Number: 316068-001US
Refer to the documentation in your kit for further details on any terms and conditions
that may be applicable to the granted licenses. Customers using tools that work with
other third party products must have licensed those products. Any targets created by
those tools should also have appropriate licenses. Software included in the kit is subject
to change.
Refer to
http://developer.intel.com/design/intarch/devkits
for details on additional
software from other third party vendors.
2.4.1
AMIBIOS* for the Development Kit
The evaluation board is pre-installed and licensed with a copy of AMIBIOS* from
American Megatrends*.
BIOS updates may be updated periodically. Please contact an field sales representative
for BIOS updates.
2.5
Before You Begin
Table 4
presents the additional hardware you may need for your kit.
2.5.1
Setting up the Evaluation Board
Once you have gathered the hardware described in
Section 2.5
, follow the steps below
to set up the development kit. This manual assumes you are familiar with basic
concepts involved with installing and configuring hardware for a PC or server system.
Note:
Review the document provided with the Development Kit titled Important Safety and
Regulatory Information. This document contains addition safety warnings and cautions.
Table 4.
Additional Hardware
VGA Monitor
You can use any standard VGA or greater resolution monitor.
Keyboard
You can use a keyboard with a PS/2* connector or adapter as well as USB.
Mouse
You can use a mouse with a PS/2* connector or adapter as well as USB.
Hard Drives
You can connect up to four IDE and two SATA devices to the evaluation board.
Floppy Drive
(optional)
You can connect a floppy drive to the connector on the evaluation board. No floppy
drives or cables are included in the development kit.
Other Devices and
Adapters
The evaluation board behaves much like a standard PC motherboard. Many PC-
compatible peripherals can be attached and configured to work with the evaluation
board. For example, you may want to install a sound card or additional network
adapters. You are responsible for procuring and installing any drivers required for
additional devices.
450 W or greater SSI
12 V external power
supply
Power supply for the Evaluation Board. No power supply is included in the
development kit.