62
Camera Sequencing
DigitalSENTRY can automatically cycle through configurable sequences of
camera combinations. To configure a sequence, select the Save Local Camera
Group button and select the Camera Sequence Setup tab. Click New Sequence,
type a name for the sequence, enter a dwell time (the amount of time, in
seconds, that each combination of cameras is displayed in the cycle), and click
Save.
A sequence can contain camera groups configured on the server and local
groups configured on the remote client computer. The tree on the left side of
the tab contains a list of all available camera groups and local groups. To add a
group to the sequence, drag its name to the list on the right side of the tab (or
select the group and click the right arrow). To remove a group from the
sequence, drag its name back to the tree (or select the group and click the left
arrow). Add groups until the sequence is complete. You can re-order the
sequence by selecting a group and clicking the up and down arrows.
The Rename Sequence and Delete Sequence buttons allow you to modify or
remove the sequence selected in the Camera Sequence Name drop-down list.
Copying Local Configuration Information to Other Computers
The .INI File Configuration tab allows you to locate the .INI file that contains
information about the local configuration so that you can copy it to another
client computer. Simply locate the file and copy it to the same location on the
other computer over a network or using a portable data storage medium.