9
Remember that if two or more 2400-A16’s are connected
to the ezeio Controller, the 2400-A16 ‘
Address
’ and
corresponding eze ‘
Polling address
’ on the additional
unit(s) must be set to a different number.
Never use the same number twice.
For example, the 2
nd
2400-A16 ‘Address’ and eze
corresponding ‘Polling address’ may be set to
2
.
Enter your Account number, Login and Password.
The first task is to add the 2400-A16 onto the
ezeio
Controller. Click on the ‘Configure’ tab and wait for the Configure
screen to appear:
Click on ‘Devices’ and then click on ‘Add device’.
Select ‘
Intech A16
’ in the drop down list.
Next, enter the ‘Serial/ModBus address’, which must be set the same in
the 2400-A16 as well. In this example,
1
has been entered:
Click on ‘Add device’.
Configuring the
ezeio
Controller.
Go to
www.ezecontrol.com
