15
Important note:
The monthly ‘Service plan’ fee you chose from eze has
a monthly limit on SMS text messages. Be careful when configuring and
saving configuration changes, as this resets the alarm code and will
generate another text message on any text alarms that have been
activated.
Move the alarm set point clear of any alarm point to prevent wasting text
messages when editing.
Note:
International format of mobile phone number is required.
i.e. New Zealand = +642xxx
2. Two set point settings are required, one for setting the alarm, and the 2
nd
for unsetting the alarm as per this screen shot:
3. Example for configuration of a SMS text alarm message:
When in this alarm configuration screen,
leave the configuration as it is shown here.
The mobile phone number for the text message.
Section 3 - Alarms.
The eze system
provides a powerful mix of alarm outputs including: alarm relay actuation on the
ezeio
controller and
2400-A16 relay outputs, email alarm messages, SMS text messages. All of this is covered in the
eze
User Manual
starting on page 35.
Supplementary notes:
Terminology varies a little compared to SCADA but is easy to follow.
1.
