INSYS GSM 4.2 easy, Дополнительное руководство

Страница: 30 / 39

30 Oct-08
5.7.1 GSM Connection
5.7.1.1 PIN
The INSYS GSM 4.2 easy can store the SIM card PIN internally and automatically
logs into the GSM network after being switched on.
To enter, activate
New PIN and enter the PIN. Instead of the digits, only * are dis-
played. The default setting is „0000“. When the INSYS GSM 4.2 easy has a stored
PIN, the option
PIN active
is checked.
A PIN stored in the INSYS GSM 4.2 easy is deleted by
Delete PIN
. This also enables
the operation of SIM cards without PIN.
PIN active
indicates that a PIN is stored. Beneath, you will see the login state in the
following format:
GSM: registered
Ready for operation
GSM: Refused
GSM network does not allow access
GSM: not registered
SIM accepted but no access to GSM network
GSM: network search
Radio contact to GSM network too poor relocate an-
tenna position
SIM PIN missing
Enter PIN number of the SIM card and restart device
SIM PUK missing
PIN of the SIM card is locked after repeated false attempts.
To unlock, the PUK, which you find in the contract docu-
ments of your GSM provider is required. Remove the SIM
card and enter the PUK using the menu of any commercial
mobile phone. Absolutely ensure afterwards that the cor-
rect PIN is stored in the INSYS GSM 4.2 easy.
5.7.1.2 Service Center Number
Entering the number of the SMS service center (SCN) of the own GSM network
provider is required for sending alarm messages via SMS. Enter the number in in-
ternational format (e.g. Germany: +49...).
The number of the SMS service center for your SIM card can be found in the con-
tract documents of your GSM provider.
5.7.1.3 Automatic SMS Processing
Incoming SMS messages are read out once every minute. Each SMS is checked for
usability (configuration, query alarm input, setting control output) and possible
validity (format, password, selective call acceptance). After processing, a response
SMS is sent (if applicable) and the SMS is deleted from the storage location. In-
coming SMS messages are optionally protected with the remote configuration
password.