INSYS GSM 4.2 easy, Дополнительное руководство

Страница: 20 / 39

20 Oct-08
4 Initial Operation
4.1 Installation Overview
4.1.1 Installation for Configuration
The serial interface (RS232) of the INSYS GSM 4.2 easy and the configuration PC
are connected for initial operation and configuration.
The cable used for the RS232 is the default supplied 9-pin cable with 9-pin D-SUB
plug / 9-pin D-SUB jack.
4.1.2 Installation for the operation with Moeller easy
For the operation with the Moeller easy, suitable connection cables are available
(refer to Optional Accessories in the section Scope of Delivery on page 6). Alterna-
tively, the 30 cm long INSYS adapter cable may be used.
The connection of the connection cables is described in the respective supplemen-
tary sheet. For connecting the adapter cable, the part of the cable with the fasten-
ing nuts is connected to the easy PC cable of the Moeller device, which is con-
nected to the Moeller easy device on the other side. The part of the cable with the
fastening nuts is connected to the D-SUB jack of the INSYS GSM 4.2 easy.
Note: Every time the PC and the Moeller easy device are unplugged, the IN-
SYS GSM 4.2 easy must be restarted (press reset button).