INSYS GSM 4.2 easy, Дополнительное руководство

Страница: 28 / 39

28 Oct-08
5.5 Buttons
5.5.1 Send Settings
The current HSComm settings are transferred to the
INSYS GSM 4.2 easy.
5.5.2 Read Settings
The current settings of the INSYS GSM 4.2 easy are read
out and displayed in the HSComm.
5.5.3 Send default setting
The default factory settings are loaded and a reset is
executed. Afterwards, the device re-registers at the GSM network if the PIN is
stored.
5.5.4 Reset
Software reset of the INSYS GSM 4.2 easy. Afterwards, the device re-registers at
the GSM network if the PIN is stored.
5.5.5 Synchronize
The serial interfaces of the INSYS GSM 4.2 easy and the connected device have to
be configured equally. With „Synchronize“, all possible baud rates and data for-
mat settings at the PC side are tested until both sides match
5.5.6 Abort
Terminates an ongoing configuration process (Send values, read settings, send de-
fault settings – indicated by the progress bar above the buttons).