23
Overview of Pressure Control Features
Install the Float Valve
Drop the narrow end of the float valve into the float valve hole on the top of the
lid. Place one finger on the flat top of the float valve, then turn the lid over. Firmly
attach the silicone cap to the bottom of the float valve.
Do not attempt to operate the pressure cooker without the float valve and/or
silicone cap properly installed in the pressure cooking lid.
Condensation Collector
The condensation collector sits at the back of the multicooker base and
accumulates overflow moisture from the condensation rim. It should be installed
before cooking, then emptied and rinsed out after each use.
Remove the Condensation Collector
Pull the condensation collector
away
from the multicooker base; do not pull down.
Note the tabs on the multicooker base and the grooves on the condensation collector.
Install the Condensation Collector
Align the grooves on the condensation collector over the tabs on the back of the
multicooker base and slide the condensation collector into place.
DANGER
While the float valve is up, contents of multicooker are under
extreme pressure.
Do not attempt to remove the lid
. All pressure
must
be released, and float valve must be
down
. Refer to
Depressurising the Multicooker
for information on releasing
pressure. Failure to follow these instructions may result in property
damage and/or personal injury.
