FOR USE BY QUALIFIED PERSONNEL ONLY
IP21 =
IP
1
st
Digit 2
2
nd
Digit 1
Degree of Protection
IP (Ingress Protection) rating according to IEC
60529.
NOTE
IEC 60529 does not specify sealing
effectiveness against the following:
mechanical damage of the equipment;
the risk of explosion; certain types of
liquid conditions, e.g. those that are
produced by condensation; corrosive
vapours; funus; vermin
Installation
WARNING
:
This machine must be installed by a
licensed electrician. DO NOT attempt
to install this machine by unqualified
personnel.
IIMPORTANT
This machine does not come with a
plug and must be wired into a proper
receptacle per local electrical codes.
Air Compressor
A minimum of 3HP air compressor
with a rating of 20 gallons or 9 CFM is
required to operate this machine.
Shop air is recommended.
Electrical Wiring
Minimum AWG #12 UL rated
electrical wires shall be used for
external power connection.
1
st
Digit
Protection
from solid
objects
2
nd
Digit
Protection
from
moisture
0
Not
protected
0
Not
protected
1
Objects
greater
than 50 mm
1
Dripping
water
2
Objects
greater
than 12 mm
2
Dripping
water when
tilted up to
15
°
3
Objects
greater
than 2.5
mm
3
Spraying
water
4
Objects
greater
than 1 mm
4
Splashing
water
5
Dust
protected
5
Water jets
6
Dust tight
6
Heavy seas
--
---
7
0.15 m – 1
m
immersion
--
---
8
+1 m
submersion
Specifications
Voltage
208~230 Volts AC, 3
Phases (+Ground)
60 Hertz
Model 1020
9000-10000 Watts
44~48 Amps *
Weight
1874 lbs
(850 kg)
Machine Placement
3
*The specifications above were determined by a third party
certifying agency.
For installation purposes Insta recommends the following:
Voltage Requirement
3 Phase 208~230 VAC @ 60 Hz
Fuse per Phase
Rated 30 Amps
