FOR USE BY QUALIFIED PERSONNEL ONLY
Optional Temperature Offset Adjustment
1. To adjust the temperature offset, press and
hold the
OK
button for 2 seconds until the
screen displays P-1 and the current
temperature. The bottom row displays the
current offset setting in green color.
1. If the display temperature is lower than the
measured temperature, increase the offset
by the same amount. This is done by
pressing the
▲
to increase the display
temperature.
2. If the display temperature is greater than the
measured temperature, decrease the offset.
This is done by pressing the
▼
to decrease
the display temperature
.
Machine Setting
Optional Temperature Control Adjustment
1.
Press the
OK
button and scroll to the next P-
2 screen. The default setting of P-2 is 003.
This setting allows factory personnel to fine
tune the heater temperature accuracy
pending on user’s heating requirements.
Do
not attempt to alter the default setting without
consulting with Insta Service Department
personnel.
9
