manualshive.com logo in svg

Inspur AGX-5, Руководство пользователя

Поделиться
Скачать
Inspur AGX-5 Скачать руководство пользователя страница 56

50

Fig. 2.29

Note:

Please make sure that the BMC management port is connected to the network when you 
use the Manual setting options.

The options that take effect immediately in the BIOS Setup interface are implemented by 
calling the Callback function. Callback functions are only called when the options in the BIOS 

Setup interface are changed. Otherwise, the function will not take effect. For example, if 
you want to automatically get BMC parameters again, you need to set Get BMC Sharelink 
Parameters to [Do nothing] or [Manual], then set to [Auto], the function will take effect.
The settings of BMC IPv6 network parameters are similar to this, which will be omitted here.

8.2 BIOS parameter description

8.2.1 Main

Main interface displays the basic information of BIOS system, including BIOS/BMC/ME 
version, CPU type, total memory capacity and system time. 

Содержание AGX-5











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды