manualshive.com logo in svg

Inspur AGX-5, Руководство пользователя

Поделиться
Скачать
Inspur AGX-5 Скачать руководство пользователя страница 114

108

9.1.7 BMC settings

Select “BMC Settings” on the navigation tree to open the BMC Settings interface. It contains 
the interfaces of BMC network, services, NTP, SMTP, alerts, access control, BMC share NIC 
switch and BIOS boot options, as shown in the following figures.

●

 BMC network management: Contains BMC network (static IP and DHCP), DNS settings and 

network interface bonding and network link information.

●

 Services: To configure the BMC’s Web service, KVM service, ssh service, telnet service, etc.

●

 NTP settings: To set the BMC time, which has two methods:

Ø

 

Synchronize from NTP server.

Ø

 

Set time manually.

●

 SMTP settings: To set the SMTP server information related to alert.

●

 Alert settings: To set the alert event filtering and alert targets of BMC management 

module.

●

 Access control: To set IP address fields accessible to BMC.

●

 BMC share NIC switch: Contains NCSI type switch, NCSI mode switch and channel switch.

●

 BIOS boot options: To set the boot option after BIOS reset.

Содержание AGX-5











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды