Inspur AGX-5, Руководство пользователя

Страница: 19 / 170

13
Operations
4 Operations
4.1 Power up the server
Insert the power cord plug, then press the Power Button.
4.2 Power down the Server
Alarm!
To minimize the risk of personal injury, electric shock or equipment damage,
please unplug the power cord to disconnect the power source. The Power button on the
front panel cannot disconnect the power supply thoroughly. Before the power supply is
disconnected, some power supplies and internal circuits are still alive.
Note: If you are installing a hot-pluggable device, you do not need to disconnect the power
supply.
1. Back up the server data.
2. Shut down the operating system gracefully.
3. Unplug the power cord.
The system is now in the power-off position.
4.3 Extend the server from the rack
1. Follow the rack mounting instructions, and loose the four captive screws within the ears
at both sides by using a screwdriver.
2. Pull out the server slowly out of the rack. Install the lifting handles at both sides and carry
it onto an antistatic bench.
Alarm! To minimize the risk of personal injury and equipment damage, ensure the rack
is stable enough before pulling out the components from the rack. A single server weighs
above 100kg and should be lifted by at least five people or by using auxiliary equipment.