manualshive.com logo in svg

Inspur AGX-5, Руководство пользователя

Поделиться
Скачать
Inspur AGX-5 Скачать руководство пользователя страница 40

34

to set the Boot Mode (UEFI Mode/Legacy Mode). Set the Option ROM execution mode of 
Network, Storage, Video OPROM Policy and Other PCI devices, as shown in the following 

figure.

At present, Inspur Purley platform servers are set to UEFI Mode by default. Compared with 
Legacy mode, UEFI mode has many advantages: It supports boot from the GPT disk which 
is larger than 2.2T, supports IPv6/IPv4 PXE boot, and provides UEFI Shell environment. This 

option can be set according to customer’s demand.

If the Boot Mode is set to Legacy Mode, the Option ROM execution mode of Network, 
Storage, Video OPROM Policy and Other PCI devices must be set to Legacy.
If the Boot Mode is set to UEFI Mode, the Option ROM execution mode of Network must 
be set to UEFI, and the Option ROM execution mode of Storage, Video OPROM Policy and 
Other PCI devices is suggested to set to UEFI. If there are special requirements, it can be set 

to Legacy.

Fig. 2.2

8.1.3 View system information

Login to the BIOS Setup interface, and the Main menu displays the current system 
information, including BIOS/BMC/ME version, CPU/PCH SKU/RC version, memory and other 
information, as shown in the following figure.

Содержание AGX-5











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды