manualshive.com logo in svg

Inspur AGX-5, Руководство пользователя

Поделиться
Скачать
Inspur AGX-5 Скачать руководство пользователя страница 163

Battery replacement

 157

11 Battery replacement

If the server no longer automatically displays the correct date and time, you may need to 

replace the battery that provides power to the real-time clock.

Warning!

 The computer contains an internal lithium manganese dioxide, a vanadium 

pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is 
not properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
• Replace only with the spare designated for this product.

To remove the component:

1.

 Power down the server.

2. 

Extend the server from the rack.

3.

 Remove the access panel.

4. 

Remove the battery.

5. 

Install the new battery.

Содержание AGX-5











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды