Inspur AGX-5, Руководство пользователя

Страница: 133 / 170

BMC settings
127
Provides the alarm report and alarm indication in the event of fault detection.
9.2.2.3 Command line function introduction
The command line module includes query and setting commands for network, sensor, fan,
user management, system and server.
9.2.3 Web interface introduction
This section introduces the Web interface of the management system, as well as operation
steps to login the Web interface.
● Login Web interface: Introduces the method to login the Web interface.
● Web interface introduction: Introduces the Web interface layout.
9.2.3.1 Login Web interface
This guide introduces the operation steps to login to the Web management interface, taking
the Windows Operating System and the Firefox browser as an example.
Note: When carrying out interface operation via Web, a maximum of 20 users can be logged
in at the same time.
Step 1: Ensure the management network ports on the client and server are connected to
the internet.
Step 2: Open the browser, and enter “http://ipaddress” in the address bar ( Ipaddress is the
IP address of the management network port. The default login mode is https, and the safe
operation configuration is needed).
Step 3: The login interface should appear as shown below:
1. Enter the user name and password.
Note: The system provides a default user “admin” in administer user group, and the default
password is “admin”.
2. Click “Login” to enter the management interface.