96-06434-00-01 revA
Service Manual, Inogen One G3HF
- 124 -
Instructions for Replacing the Housing:
1. Place the device on its back side.
2. Seat the feet of the front housing into the corresponding grooves on the chassis (Figure 8)
then push down and toward the device to secure the housing in the chassis.
Figure 8: Housing feet and corresponding chassis grooves
3. Replace the two screws that connect the front housing to the chassis (Figure 2).
Tighten screws to 3 in-lbs.
4. Return the concentrator to the upright position.
5. Slide the battery back into the chassis. Ensure the battery clip is fully seated.
