Innovative BV20, Руководство по эксплуатации

Страница: 8 / 48

Copyright Innovative Technology Ltd 2008 GA794-2
16
15
1
2
4.1 INTERFACE CONNECTOR PIN DETAILS
The connector pin details are described below (see table 5); they use an IDC
16-pin 0.1" pitch header with 2 rows of 8 pins.
Pin Name Description
1 Vend 1
Open collector outputs. Function changes depending on
machine interface protocol (see individual interface
descriptions for details) Also the Pulse Stream output.
Also the Serial Output pin in SSP Serial Mode and other
serial modes
2 Vend 2
3 Vend 3
4 Vend 4
Open collector outputs. Function changes depending on
machine interface protocol (see individual interface
descriptions for details)
5 Inhibit 1 Inhibit channel 1 by holding this pin HIGH. To Enable a
channel the inhibit must be held LOW Also the serial Input
pin in SSP Serial Mode, and other serial modes
6 Inhibit 2 Inhibit channel 2 by holding this pin HIGH
7 Inhibit 3 Inhibit channel 3 by holding this pin HIGH
8 Inhibit 4 Inhibit channel 4 by holding this pin HIGH
9 Busy BV20 is validating and stacking output. Active low while the
BV20 is reading, transporting or stacking a note.
10 Escrow Operate Escrow function by holding LOW (see Appendix B –
Escrow Control for full details)
11 Factory use only Do not connect
12 Factory use only Do not connect
13 Factory use only Do not connect
14 Factory use only Do not connect
15 +Vin Nominal 12V DC supply
16 0V 0V supply
Table 5 – 16 Pin Connector Details
.
BV20 Operations Manual 8