Innovative BV20 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 48

background image

Copyright Innovative Technology Ltd 2008 GA794-2

9.3 VALIDATOR PROGRAMMING SYSTEM (DA3)

The DA3 is a programming system designed to enable the programming of ITL Bank

Note Validators in the field without the use of a PC.

Once the DA3 has been programmed the user can:

•

Update the existing software within a validator to the latest versions using the

BNV Match Download Function.

•

Reprogram the validator to accept a different currency using the BNV Override

Download Function

•

Test the functionality of the validator away from the Host Machine.

For full DA3 operation and functionality details please refer to the DA3 User Manual

(Document number GA339).

Note: When using the DA3 BNV Match Download Function, any pulses and channel

allocations programmed into the BV20 will not be retained. The user must ensure that

the required dataset options are set and saved before programming the DA3.

When programming a BV20 using the DA3 BNV Override Download Function, the

firmware interface is unchanged. A Configuration Card must be used after re-

programming if a different interface is required.

9.4 INTERNET WEBSITE SUPPORT

The Innovative Technology Ltd website provides the means to download new and

updated currency sets and new versions of firmware for the BV20. You can obtain these

along with technical bulletins by visiting

www.innovative-technology.co.uk

9.5 E-MAIL SUPPORT

If the data you require is not available over the Internet Innovative Technology supports

an e-mail system to help customers with unusual requirements. The address is:

[email protected]

BV20 Operations Manual 31

«
...
29
30
31
32
33
...
»

Содержание BV20

















































Отзывы:

Нет отзывов

Похожие инструкции для BV20

Bill Validator S7 Series

Бренд: ICT Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды