Innovative BV20, Руководство по эксплуатации

Страница: 30 / 48

Copyright Innovative Technology Ltd 2008 GA794-2
9.2 ITL BANK NOTE VALIDATOR CURRENCY MANAGER
NOTES:
•
The validator must be set to Programming Mode (SSP) when connected to a
computer or DA3 and then returned to the original settings when complete (See
Chapter 4.2 Configuration Button Functions).
•
ITL BNV Currency Manager 3.2.0 or Higher must be used to access the BV20
functions.
•
Datasets can only be downloaded to a BV20 with the correct bezel width for the
currency. For example a USD dataset can only be downloaded to a 66mm
BV20. A Euro dataset can only be downloaded to a 72mm BV20.
The ITL BNV Currency Manager software offers the following functions:
•
Program the Validator by downloading pre-prepared currency data via the DA1
or DA2 kit.
•
Check the firmware version and currency set already loaded on a BV20 unit.
•
Adjust the channel and pulse configuration on a pre-programmed BV20 to your
own requirements.
•
Download a new version of firmware onto the BV20.
•
Use diagnostic functions to check Validators operation.
The software will run on an IBM compatible Personal Computer with Pentium™
Processor or equivalent (see Appendix E – PC System Specification) for operating
system requirements and requires a DA1 kit fitted to the serial port or DA2 kit fitted to
the USB port. (See Appendix C – Interface Tools DA1 – DA2).
BV20 Operations Manual 30