Innovative Circuit Technology Ltd.
19
Authentication Protocol:
Select the authentication protocol for SNMPv3
traps (None, MD5, or SHA).
Authentication Password:
If an authentication protocol is selected,
enter the authentication password for SNMPv3 traps.
Privacy Protocol:
Select the privacy protocol for SNMPv3 traps (None, or
AES).
Privacy Password:
If a privacy protocol is selected, enter the privacy
password for SNMPv3 traps.
Trap IP Addresses:
Enter the IP addresses for up to two devices that will
receive SNMP traps from the panel.
E-mail Setup
Configure these settings to enable automatic e-mail notifications directly
from the panel. The information required for this is available from your
Network Administrator, or Internet Service Provider. (ISP)
E-mail:
SMTP Server
: Enter the name or the IP address of your SMTP server used for
sending outgoing e-
mail. (e.g. “smtp.gmail.com”)
SMTP Port
: Enter the port used by your SMTP server. (Normally 25)
SMTP Server requires SSL
: Check this box if your SMTP server requires an
encrypted SSL connection.
This box should normally be checked if the SMTP port used by the SMTP
server is 465.
If the SMTP server uses STARTTLS (normally port 587), this box should be
unchecked.
Sender E-mail Address
: Enter an e-mail address that will appear as the
sender for all e-mail notifications sent from the panel.
Recipient E-mail Addresses
: Enter one or more e-mail addresses that are to
receive all e-mail notifications from the panel. Use commas to separate
multiple addresses. This field can also be used to send a text message
notification to a phone; see the
Text Message Alarm Notifications
section
for further information.
