Innovative Circuit Technology Ltd.
11
Figure 6.
Click on any one of the blue buttons in the menu bar on the left side of the
screen to select the desired page.
Status & Control
This page provides information on system voltage, system current, alarm status,
output status, and current level by output contact (1 through 12). It also allows
you to manually enable or disable DC power to the each of the output terminals.
The status of any of the five Input Alarms for alarms that have been enabled (see
Alarm Setup
page) will be shown on this page. A grey Alarm Input indicator box
shows that the sensor input is ready; a red box indicates that that external sensor
is in an alarm condition.
Enable All Outputs:
Pressing this button will enable DC power to all outputs. If
power-on sequencing is enabled on the Device Setup page, the outputs will be
enabled in sequence, instead of enabling them simultaneously.
Disable All Outputs:
Pressing this button will disable DC power to all outputs.
Output On/Off Buttons
: Pressing these buttons will enable or disable DC power
to individual outputs.
