24
Innovative Circuit Technology Ltd.
Figure 7: Mobile Web App
The Mobile Web App (shown above) provides information on system voltage,
system current, input alarm status, and the status and current level of each of
the output channels.
Tapping on an output cell will enable or disable that output. (if logged in using an
account with control access) The cell will be green when enabled, red when
disabled.
Tap the
Enable All Outputs
button to enable DC power to all outputs. If power-
on sequencing is enabled on the Device Setup page, the outputs will be enabled
in sequence, instead of enabling them simultaneously.
Tap the
Disable All Outputs
button to disable DC power to all outputs.
PASSWORD RESET
Reset the Administrator password, the network, and web server settings to the
original factory default values by doing the following: (the standard User
password and other settings are not affected)
1.
Press and hold the
Output Select
button on the front panel for
approximately 20 seconds until
Resetting
is shown on the LCD.
2.
Release the button
3.
Press and release the output select button once to view the Network
Status screen on the LCD. The new IP address of the panel will be
displayed.
