Innovative Circuit Technology Ltd.
9
MAIN SCREEN
Line 1: Displays the name of the panel, which is customizable through the web-
based configuration utility.
Line 2: blank
Line 3: Displays the system voltage. Voltage display will blink if the system
voltage exceeds the Under-Voltage or Over-Voltage Thresholds set on the
Alarm Setup
page.
Line 4: Displays the system current. Current display will blink if the system
current exceeds the Over-Current Threshold set on the
Alarm Setup
page.
NETWORK SCREEN
Line 1: Displays the network status.
Line 2: Displays the connection type.
Line 3: Displays the IP address assigned to the panel.
Line 4: Displays the MAC address of the panel.
OUTPUT SCREEN (1
–
12)
Line 1: Displays the name of the load, which is customizable through the web-
based configuration utility.
Line 2: Displays the output status.
ENABLED
for output enabled,
DISABLED
for
output disabled, and
FUSE OPEN
for blown or missing fuse.
Line 3: Displays the output voltage. Voltage display will blink if the voltage
exceeds the Under-Voltage or Over-Voltage Thresholds set on the
Alarm
Setup
page.
Line 4: Displays the output current for that individual output. Current display will
blink if the output current exceeds the Output Over-Current or Under-
Current Thresholds set on the
Output Setup
page.
ALARM INPUT SCREEN (1
–
5)
Line 1: Displays the alarm input number.
Line 2: Displays the name of the alarm input if it has been entered through the
web-based configuration utility. Otherwise, this line is blank.
Line 3: blank
Line 4: Display the alarm input status.
ALARM
if the alarm input is triggered,
READY
if the alarm input is not triggered.
Note: The alarm input screens are only displayed if the alarm input has enabled
(see
Alarm Setup
section in the instruction manual).
