Innovative Circuit Technology Ltd.
17
Port number must be appended to the URL used to access the panel. (e.g.
use URL
for IP address
192.168.0.180
, port
8000)
HTTPS Port
: The HTTPS (HTTP Secure) protocol uses encrypted data transfer
between web browsers and servers for higher security. The default HTTPS
port is
443
. Append any changed HTTPS port to the end of the URL for the
panel.
To access the panel through a secure HTTPS connection, use
https://
at the
start of the units URL. (e.g.
for IP address
192.168.0.180
, HTTPS port
8888
)
SNMP:
Configure these settings if you would like to use SNMP based monitoring. SNMP
(Simple Network Management Protocol) is an industry standard protocol for
network management software. Enabling the SNMP function on the panel will
allow standard SNMP management software to connect to the SNMP agent
running on the panel and read real time system information such as system
voltage, and channel currents. The panel can send SNMP traps to the external
management software when an alarm or fault occurs.
The information available from the SNMP agent is described in a MIB
(Management Information Base) file, which can be downloaded from the panels
Help
page. The unique panel MIB file must then be imported into your external
SNMP management software.
Enable SNMP
: Check this box to enable the SNMP agent
SNMP Version:
Sets the SNMP version (
v1/v2c
,
v3
, or
All
) supported by the panel
SNMP agent. If
All
is selected, all SNMP versions will be supported
simultaneously. The appropriate settings for the selected SNMP version will need
to be configured.
Enable SNMP Write Access:
Turning on this setting will allow you enable or
disable DC power to individual outputs through SNMP. If this box is unchecked,
all information available from the SNMP agent will be read-only.
SNMP Control Access:
Sets the level of device control that is allowed through
SNMP. This setting is only available if Enable SNMP Write Access is enabled.
•
Output Control:
Allows DC power to individual outputs to be
enabled or disabled through SNMP. No other settings can be
configured through SNMP.
•
Full Device Control:
Allow SNMP clients to set all device settings
through SNMP. MIB files for full SNMP device control can be
downloaded from the ICT Website:
