manualshive.com logo in svg

Innovation Technologies ELITE, Руководство по установке, Страница: 24 / 188

Поделиться
Скачать
Innovation Technologies ELITE Скачать руководство пользователя страница 24

ELITE

 Installation guide 

 

Chapter 1:  Installation 

16

Device interface serial ports

 

Elite comes standard with nine physical RS-232 serial communication ports: 

•

 

COM1

 is a DB-9M connector that is part of the system’s single board computer 

(SBC card). It is dedicated to PBXLink hardware (Avaya Digital or Mitel SX-50 
DNIC integrations) or may be used for miscellaneous serial interfaces if this 
hardware is not part of the system. 

•

 

COM2 

is dedicated to Elite’s internal modem. There is no physical connector for 

this port. 

•

 

COM3

 is part of the Multi-COM port cable, and may be used for miscellaneous 

serial interfaces. 

•

 

COM4

 is part of the Multi-COM port cable, and is dedicated to any PBX serial 

interfaces. 

•

 

COM5

 is part of the Multi-COM port cable, and is dedicated to any PMS serial 

interfaces. 

•

 

COM6

 is part of the Multi-COM port cable, and may be used for miscellaneous 

serial interfaces. 

•

 

COM7

 is part of the Multi-COM port cable, and may be used for miscellaneous 

serial interfaces. 

•

 

COM8

 is part of the Multi-COM port cable, and may be used for miscellaneous 

serial interfaces. 

•

 

COM9

 is part of the Multi-COM port cable, and may be used for miscellaneous 

serial interfaces. 

•

 

COM10

 is part of the Multi-COM port cable, and may be used for miscellaneous 

serial interfaces. 

 

Содержание ELITE





























































































































































































Отзывы:

Нет отзывов