manualshive.com logo in svg

Innovation Technologies ELITE, Руководство по установке, Страница: 22 / 188

Поделиться
Скачать
Innovation Technologies ELITE Скачать руководство пользователя страница 22

ELITE

 Installation guide 

 

Chapter 1:  Installation 

14

 

4.  Examine the Direct Calls information in the Call ID tab.

 

 

The 

Direct Call ID Format

 field shows 

1%4g

. Let’s break down this format string. 

1 

Prefix digit 

4

  Maximum length of extension 

% 

Variable 

g 

Calling party 

The string means that the system is expecting a “1”, followed by a 4-digit extension 
of maximum length on direct calls. This setting is fine if you have a mixture of  3- 
and 4-digit extensions. If you have only 3-digit extensions, or a maximum length of 
5-digit extensions, click the field and change the setting. As a rule, the number before 

g

 should reflect the largest extension programmed in your PBX. 

5.  Examine the Covered Calls information in the Call ID tab. 

The 

Type A Covered Call ID Format

 field shows 

0%4d

. Again, let’s break down this 

format string: 

0 

Prefix digit 

4

  Maximum length of extension 

% 

Variable 

d 

Called party 

The string means that the system is expecting a “0,” followed by a 4-digit extension 
of maximum length on covered calls. This setting is fine if you have a mixture of  
3-and 4-digit extensions. If you have only 3-digit extensions, or a maximum length of 
5-digit extensions, click the field and change the setting. As a rule, the number before 

d

 should reflect the largest extension programmed in your PBX. 

Three possible covered call formats are supported (A, B, and C). Some PBX  
in-band integrations, such as Avaya Mode Code, present one type of format for calls 

Содержание ELITE





























































































































































































Отзывы:

Нет отзывов