Innovation Technologies ELITE Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 188

Innovation Technologies ELITE Скачать руководство пользователя страница 11

ELITE

Installation guide

Chapter 1: Installation

3

Inspecting and installing hardware

Before connecting Elite to the phone system and electrical power, check its
components. If all the components are present, you can install the system.

1. Open the Elite computer.

2. Inspect the interior of the Elite voice mail system.

Note

: You must ground yourself to the outside of the case using a static wrist strap.

Failure to do so may damage Elite. Connecting the AC power cords to the computer
and plugging them in will provide a path to ground.
Verify that all cables and boards are seated properly. In particular, check:

•

All power connections from the power supply to the motherboard or passive
back plane, hard drive, floppy drive, and CD-RW drive.

•

That all circuit boards are properly seated. Reseat any boards that appear loose.

•

That all memory modules are properly seated.

•

That all ribbon cable connections between the motherboard, RAID 1 controller
card, hard drives, floppy drive, and CD-RW drive are secure.

«
...
9
10
11
12
13
...
»

Содержание ELITE





























































































































































































Отзывы:

Нет отзывов