Innovation Technologies ELITE Скачать руководство пользователя страница 155

Страница: 155 / 188

ELITE

Installation guide

Chapter 3: Reference

147

Click the

Send

button to send the test email. Verify that the user received the

email message. Please note that the message may have been deposited in the
user’s “junk mail” folder.

Front desk mailboxes

This area allows you to create, edit, and view Front Desk mailboxes. To reach this
option, click the

button in the Elite main screen and then select

Configure

System.

In the next screen, click

Front Desk

under

Mailboxes

in the system tree.

•

To create a front desk mailbox, double-click the

New Mailbox

icon. In the

next window, enter an ID for the new mailbox and then click

•

To edit or view an existing front desk mailbox, double-click the mailbox icon.

A window appears and offers options for Front Desk mailboxes. These options
are identical to those for setting up staff mailboxes (as explained in the previous
section), except that Front Desk mailboxes have an additional tab.

Содержание ELITE





























































































































































































Результаты поиска

Содержание ELITE

Отзывы:

Innovation Technologies ELITE, Руководство по установке, Страница: 155 / 188

Результаты поиска

Содержание ELITE

Отзывы: