Innova 3120d, Руководство пользователя, Страница: 91 / 131

Ford OBD1 Systems
ERASING DTCs
3120d 89
4. If you chose to erase DTCs, a status
screen displays while the erase function
is in progress.
„ If the erase was successful, a
confirmation message shows on the
Diagnostic Tool’s LCD display.
press the M button to exit.
„
If the erase was not successful, an
advisory message shows on the
LCD display. Verify that the Diag-
nostic Tool is properly connected to
the vehicle's DLC and that the
ignition is ON. If the erase process
still does not complete, turn the
ignition OFF, wait 10 seconds, then
turn back ON and repeat steps 2
and 3.
„
If the erase process fails after three
attempts, the message “Contact
Technical Support” displays.
- Press the M button to return to
the Ford OBD1 Menu.
- Turn the ignition off, and
disconnect the Diagnostic Tool.
- Contact Technical Support for
assistance.
Erasing DTCs does not fix the problem(s) that caused the
code(s) to be set. If proper repairs to correct the problem that
caused the code(s) to be set are not made, the code(s) will
appear again and the check engine light will illuminate as soon
as the problem that cause the DTC to set manifests itself.