Innova 3120d, Руководство пользователя, Страница: 43 / 131

Using the Diagnostic Tool
VIEWING OEM ENHANCED DTCs
3120d 41
„
The Diagnostic Tool will display a
code only if codes are present in the
vehicle’s computer memory. If no
codes are present, a “No OEM En-
hanced DTC’s are presently stored in
the vehicle’s computer” is displayed.
Press the M button to return to the
Main Menu.
3. If more than one code was retrieved press the DTC button, as
necessary, to display additional codes one at a time.
„ Whenever the Scroll function is used to view additional codes,
the Diagnostic Tool’s communication link with the vehicle’s
computer disconnects. To re-establish communication, press the
POWER/LINK
button again.
4. When the last retrieved DTC has been displayed and the DTC
button is pressed, the Diagnostic Tool returns to the “Priority” Code.
„
To view additional OEM enhanced DTCs, repeat steps 1 through 4,
above.
„ To exit the enhanced mode, press the M button. The Diagnostic
Tool returns to the Main Menu.
Ford/Mazda OEM Enhanced DTCs
Mazda Enhanced DTCs are available for Mazda-branded
Ford vehicles only.
When OEM Enhanced is chosen from the System Menu (and Ford is
selected when prompted), the Ford Enhanced menu displays. You may
view DTCs for either the “Continuous Memory Test”, “KOEO (Key On
Engine Off) Test” or “KOER (Key On Engine Running) Test.”
1. Use the UP and DOWN buttons,
as necessary, to highlight the desired
option, then press the ENTER
button.
When choosing to view KOER
Test DTCs, start the vehicle’s
engine before making your
selection.
„
If the KOER Test was selected, and
the vehicle’s engine is not running,
an advisory message shows on the
Diagnostic Tool’s display.
- Press the M button to return to the
Main Menu.