Innova 3120d, Руководство пользователя, Страница: 52 / 131

Using the Diagnostic Tool
VIEWING ABS DTCs
50 3120d
„ If the Diagnostic Tool fails to link to
the vehicle’s computer, a "Linking
Failed" message shows on the
Diagnostic Tool’s display.
- Verify the ignition is ON, then
press the ENTER button to
continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 9 for a description of
LCD display elements.
„ A visible icon indicates that the Diagnostic Tool is being
powered through the vehicle’s DLC connector.
„
A visible icon indicates that the Diagnostic Tool is linked to
(communicating with) the vehicle’s computer.
„
The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
„ The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.
If the definition for the currently
displayed code is not available, an
advisory message shows on the
Diagnostic Tool’s LCD display.
I/M MONITOR STATUS icons are
not displayed when viewing ABS
DTCs.
In the case of long code definitions, a small arrow is shown in
the upper/lower right-hand corner of the code display area to
indicate the presence of additional information. Use the UP
and DOWN buttons, as necessary, to view the additional
information.
„
The Diagnostic Tool will display a
code only if codes are present in the
vehicle’s computer memory. If no
codes are present, a "No ABS DTC’s
are presently stored in the vehicle’s
computer" is displayed. Press the M
button to return to the Main Menu.
3. If more than one code was retrieved press the DTC button, as
necessary, to display additional codes one at a time.
„ Whenever the Scroll function is used to view additional codes,
the Diagnostic Tool’s communication link with the vehicle’s
computer disconnects. To re-establish communication, press the
POWER/LINK
button again.