manualshive.com logo in svg

Innova 3120d, Руководство пользователя, Страница: 10 / 131

Поделиться
Скачать
Innova 3120d Скачать руководство пользователя страница 10

Diagnostic Tool Controls 

CONTROLS AND INDICATORS 

8

3120d

7.

UP button – When in MENU mode, scrolls UP through the menu

and submenu selection options. When LINKED to a vehicle, scrolls
UP through the current display screen to display any additional data.

8.

ENTER button - When in MENU mode, confirms the selected

option or value.

9.

DOWN button - When in MENU mode, scrolls DOWN through

the menu and submenu selection options. When LINKED to a
vehicle, scrolls DOWN through the current display screen to display
any additional data.

10. GREEN LED - Indicates that all engine systems are running

normally (all Monitors on the vehicle are active and performing their
diagnostic testing, and no DTCs are present).

11. YELLOW LED - Indicates there is a possible problem. A “Pending”

DTC is present and/or some of the vehicle’s emission monitors have
not run their diagnostic testing.

12. RED LED - Indicates there is a problem in one or more of the

vehicle’s systems. The red LED is also used to show that DTC(s)
are present. DTCs are shown on the Diagnostic Tool’s display. In
this case, the Malfunction Indicator (“Check Engine”) lamp on the
vehicle’s instrument panel will light steady on.

13. Display - Displays settings Menu and submenus, test results,

Diagnostic Tool functions and Monitor status information. See
DISPLAY FUNCTIONS, following, for more details.

14. CABLE - Connects the Diagnostic Tool to the vehicle’s Data Link

Connector (DLC).

15. CHRYSLER Connector Cable Adaptor - Installs on cable (item 14)

when connecting to a Chrysler OBD1 Data Link Connector.

16. FORD Connector Cable Adaptor - Installs on cable (item 14) when

connecting to a Ford OBD1 Data Link Connector.

17. GM Connector Cable Adaptor - Installs on cable (item 14) when

connecting to a GM OBD1 Data Link Connector.

18. OBD II Cable - Connects the Diagnostic Tool to the vehicle's Data

Link Connector (DLC) when retrieving codes from OBD II systems.

19. TOYOTA Connector Cable Adaptor - Installs on cable (item 14)

when connecting to a Toyota OBD1 Data Link Connector.

Содержание 3120d




































































































































Отзывы:

Нет отзывов