Inmarsat EXPLORER 527, Руководство пользователя

Страница: 55 / 152

Chapter 4: Using the interfaces
TT 98-123789-D Using a phone or fax machine 47
Connecting an analog phone or a fax machine
Before connecting to the Phone/Fax interface
The EXPLORER 527 has two Phone/Fax connectors, one at the front panel and one at the rear
connector panel.
To connect a phone or a fax machine to one of the Phone/Fax connectors, you need an analog
telephone cable with an RJ-11 connector. For specifications and pin-out, refer to Phone/Fax
interface on page 125.
Connecting to the Phone/Fax interface
Do as follows:
1. Connect the cable to your phone or fax machine.
2. Connect the other end of the cable to one of the Phone/Fax connectors on the EXPLORER 527.
One Phone/Fax connector is placed at the front panel, the other is placed at the rear
connector panel. Both are marked
Phone/Fax .
3. Power on the EXPLORER 527.
4. Check the connection by making a phone call or sending a fax.
See Making or receiving a phone call with the EXPLORER™ 527 on page 49 or Sending or
receiving a fax message on page 53.
If connection fails, check that the interface is enabled in the EXPLORER 527.
If the analog phone icon is not present in the display Main screen and in the Home window of the
web interface, the interface is disabled.
See Enabling or disabling an interface on page 44.
If the interface is enabled, but connection fails, refer to the the Troubleshooting Guide on page 113.
Note You can only connect to one of the Phone/Fax connectors at a time.