Inmarsat EXPLORER 527, Руководство пользователя

Страница: 139 / 152

TT 98-123789-D 131
Appendix B
AT commands
B
In this appendix
This appendix contains a list of AT Commands for the EXPLORER 527.
Starting up an AT command session
Set up your computer to use the USB service interface. For further information, see Using the USB
service interface on page 57.
Connect your computer to the USB service interface of the EXPLORER 527 and launch your
terminal program.
The following section contains a list of commands that can be used with the EXPLORER 527. For
further information on the AT commands, refer to the following standards:
• ITU V.250 Serial asynchronous automatic dialing and control
• 3GPP TS 27.005 ver. 4.2.0 , Use of Data Terminal Equipment - Data Circuit terminating
Equipment (DTE-DCE) interface for Short Message Service (SMS) and Cell Broadcast Service
(CBS)
• 3GPP TS 27.007 ver. 4.6.0 , AT command set for User Equipment (UE)
3GGP standards are found on www.3gpp.org
ITU standards are found on www.itu.int