Inmarsat EXPLORER 527, Руководство пользователя

Страница: 60 / 152

Chapter 4: Using the interfaces
TT 98-123789-D Using a phone or fax machine 52
Handling waiting calls
During a call, if a second party attempts to make contact with you, you will hear a Call Waiting
indication. The Call Waiting indication is two beeps and a pause of 3 seconds, then two beeps
again etc. If no action is taken, the waiting call is released after a time out period.
In the web interface you can enable or disable the call waiting indication. For further information,
see
When you receive a Call Waiting indication, you have the following options:
Holding a call
During a call, you may place the initial call on hold while another call is made.
Note The phone must have an R key to be able to use these functions.
If you want to: Do as follows:
Clear the current call,
and accept the waiting call. Press R 1 # , within the time out period.
Hold the current call,
and accept the waiting call. Press R 2 # , within the time out period.
Ignore the waiting call. Take no action.
Reject the waiting call. Press R 0 # , within the time out period.
Note The phone must have an R key to be able to use these functions.
If you want to: Do as follows:
Place a call on hold. Press R 2 # .
Place the existing call on hold and establish a
new call. Press R and dial the second phone number
followed by # .
Shuttle between the two calls. Press R 2 #
(irrespective of whether the second call was
acquired using Call Hold or acceptance of Call
Waiting.)
Clear the held call, if no waiting call exists. Press R 0 # .
Clear an active call and return to the held call. Press R 1 # .
Note that this is only possible if no waiting
call exists.