Inmarsat EXPLORER 527, Руководство пользователя

Страница: 54 / 152

Chapter 4: Using the interfaces
TT 98-123789-D Using a phone or fax machine 46
Phone numbers for incoming 3.1 kHz Audio and Standard Voice
3.1 kHz Audio and Standard Voice have separate phone numbers. This way a person calling a
phone connected to the EXPLORER 527 can select whether to use 3.1 kHz Audio or Standard Voice,
simply by using one of the two phone numbers.
If the Mobile subscriber numbers are available on the SIM card you can look them up, using either
the display menu system or the web interface.
To view the phone numbers for Standard Voice and 3.1 kHz Audio, do one of the following:
• Select
PROPERTIES > MOBILE NUMBERS
in the display menu system, or
• access the web interface and select PROPERTIES . The numbers are listed in the field
Mobile subscriber numbers . For further information, see The web interface on page 59.
If the numbers are not available in the display menus nor the web interface, refer to your airtime
subscription.
For information on how to make a call to the EXPLORER 527, see Making a call to the
EXPLORER™ 527 on page 50.
Selecting the incoming call type
To select which call types are accepted for an incoming call, first connect a computer. Refer to the
relevant section in this chapter, e.g. Connecting to the LAN interface on page 56.
Then do as follows:
1. Access the web interface.
For further information, see The web interface on page 59.
2. Select SETTINGS
>
Phone/Fax .
3. At Incoming Calls , select Standard or 3.1 kHz Audio or both.
If the call type used for a call to the EXPLORER 527 is not selected in the web interface, the
connected phone will not ring.
Note
The call type you are using must be selected in the web interface (refer to the next
section).