Inmarsat EXPLORER 527, Руководство пользователя

Страница: 17 / 152

Chapter 1: Introduction
TT 98-123789-D 9
User interfaces
The keypad and display are used for displaying status and for changing simple parameters.
To obtain full access to all features and for ease-of-use, you should use a computer
(a PC, Laptop or similar) and the built-in
web interface .
The web interface is used for easy configuration and daily use. The web interface is accessed
directly from a computer connected to the EXPLORER 527, using an Internet browser. No
installation of software is needed.
For further information on the web interface, see Chapter 5, Using the web interface.
Additionally, it is possible to control the EXPLORER 527 using AT Commands. Refer to Appendix B,
AT commands for a list of supported commands.
Antenna
The EXPLORER 527 uses an active tracking antenna, TT-3053A, which can be mounted on the roof
of a vehicle, either with 3 bolts or with magnetic mounts. The antenna is connected to the
EXPLORER 527 with one of the antenna cables included in the delivery. The antenna automatically
points to the BGAN satellite and registers on the BGAN network after start-up.
SIM card
The SIM (Subscriber Identity Module) card used for the EXPLORER 527 is a standard SIM card,
which is acquired from the Airtime Provider.
The EXPLORER 527 requires a SIM card to go online and to access the settings of the
EXPLORER 527. Without a SIM card you can only see the Main screen of the display system
showing signal strength etc. Using the web interface, you can view the properties of the
EXPLORER 527 and upload software without inserting a SIM card. Upload of software, however,
requires an Administrator user name and password.
SIM lock
The supplier may SIM lock the EXPLORER 527 to a specific provider. For further information,
contact your supplier.