Inmarsat EXPLORER 527, Руководство пользователя

Страница: 22 / 152

Chapter 2: Getting started
TT 98-123789-D 14
installing the terminal
Before you start
There are two options for mounting the EXPLORER 527: Rack mounted or top mounted.
Four rubber pads are included with the EXPLORER 527:
• If the EXPLORER 527 is to be top mounted, mount the rubber pads in the four holes in the
bottom of the EXPLORER 527.
• If the EXPLORER 527 is rack-mounted, do not mount the rubber pads.
Four mounting brackets are also included with
the EXPLORER 527.
Each bracket has three circular holes for
mounting the bracket on the EXPLORER 527
and two oval holes for fastening the
EXPLORER 527 to a rack or a surface.
Rack mount
Do as follows:
1. Remove the two screws closest to the
front panel in each side of the
EXPLORER 527 (one at the top and
one at the bottom).
Keep the four screws.
2. Use the screws that were removed in
the previous step to attach one
bracket to each side of the front panel
as shown.
Use only two of the three circular
holes for each bracket, as illustrated
in the previous section.
3. Insert the EXPLORER 527 in a 19” rack.
4. Secure the EXPLORER 527 to the rack using the oval holes in the mounting brackets.
Used when the unit is
Used when the unit
rack mounted
is top mounted