INIM SmartLoop Series, Руководство по установке

Страница: 5 / 60

Installation manual
Introduction 5
Chapter 1
Introduction
Note:
The control panels described in this manual have been designed and developed to the highest standards of
quality, reliability and performance. All product components are capable to application requirements and
able to operate in compliance with the related technical specifications when the temperature external to
their casing complies with Category 3k5 of EN60721-3-3:1995.
Danger:
The GAS control function is not EN54-2 compliant, as this feature is not mentioned in the
aforesaid standard.
Danger:
In order to validate the IMQ-SECURITY SYSTEMS certification, and in compliance with EN54-
2 regulations, all the manual alarm buttons and fire detectors employed in the system must
be associated with fire detection and alarm functions.
1.1 Application and use
The SmartLoop analogue-addressable fire alarm panel manages up to eight loops. The SmartLoop is
capable of working in a network environment (maximum configuration 30 nodes arranged in a token ring).
The loops accommodate different types of fire-security devices (detectors, input and output modules,
callpoints, fire bells, etc.). The maximum loop wire length is 2000 m. The SmartLoop also provides
supervised outputs which guarantee full control of peripheral device functions (e.g. fire bells). The panel
identifies and signals alarm, pre-alarm, fault, early warning, bypassed zone, test and monitoring
conditions. The system status is indicated on the display and on the system status LEDs. The SmartLoop
panel supports up to 14 Repeater panels (accessory items) which replicate system signals/data and allow
building occupants with Level 2 authorization to silence and reset the system. The panel can also be
connected to a PC or printer.
The self-addressing feature and reduced-complexity point programming allow fast and easy installation.
Figure 1 - Example configuration: 6 node token-ring network layout (Hornet)
A
D
B
C
E
PSTN
line
Internet