INHECO DWP, Руководство пользователя, Страница: 15 / 37

INHECO 14
Doc ID: 900434-001
March 2018
3
saFety InstrUCtIons
3.1.
product-specific risks
WarnInG
Follow the safety instructions given below in order to avoid danger for user and device.
General
- The Incubator devices ("the unit") hardly require any maintenance, for minor
maintenance interventions refer to → Servicing, page 37 and Quality, page 41.
- The main power connector of the unit must always be accessible to shut down the
system in case of emergency.
- The unit has to be placed in an upright position.
- Standing ground must be solid, even and stable to bear the devices weight.
- Free air supply must be ensured to prevent damage to the . Do not cover the
ventilation openings at the front and rear panel at any time.
- Ensure a minimum of at least 250mm or 10 inches of free space between the
ventilation openings and adjacent devices or walls.
- Do not exceed minimum or maximum ambient temperature and humidity conditions
during operation or storage of the unit → Technical Data, page 11.
- The unit must not be used in environments with risk of explosion
- The unit is for indoor use only.
- The unit must not be used if the Incubator, the power adapter housing or the power
cable show visible signs of damage.
- Make sure that the electrical specifications on the label at the rear panel of the battery
charger meet your local situation.
Crushing Hazard:
- The excenter can possibly pinch your skin when changing its position.
Burning Hazard:
- The Incubator can burn your skin, even after switching off the Incubator it can still be
hot and could seriously burn your skin.
Electrical Shock :
- The unit must not be used if the unit itself or the power cable shows visible signs of
damage.
- You can suffer an electric shock and injuries, if the Incubator is not connected properly
or if you do not disconnect the unit from the wall power outlet before opening the
housing.
- Never connect or remove the power plug with wet hands.
- Make sure that the Incubator
does not get in contact with liquids while the unit is
connected to the power outlet.
- Original power cable provided by INHECO has to be used to guarantee safe and
NOTICE
Turning a shaker unit upside down might require a renewal of the shaker drive. Keep the
screws for later transportation purposes.