InfoPrint 6500 DBCS, Руководство пользователя

Страница: 142 / 230

142
Chapter 6
Fault Messages
080 POWER SUPPLY HOT No Power supply
temerature is elevated
beyond normal
threshold. Contact your InfoPrint
service representative.
081 POWER VOLT CHECK*
SEE USERS MANUAL
No Power supply voltage
failure. Contact your InfoPrint
service representative.
082 POWER 8.5V CHECK*
SEE USERS MANUAL
No Internal power failure. Contact your InfoPrint
service representative.
083 INTAKE FAN CHECK*
SEE USERS MANUAL
Yes Sensors cannot detect
current in fan circuit. Power off the printer.
Check for obstruction of
vents and fan airway;
remove any obstructions.
Check for items beneath
the printer blocking
cabinet vents. Power
back on the printer. If this
message reoccurs,
contact your InfoPrint
service representative.
084 POWER 48V CHECK*
SEE USERS MANUAL
No Controller voltage failure.
15 V faiure on the
controller board. Contact your InfoPrint
service representative.
085 CONTROL VOLT
CHECK
SEE USERS MANUAL
No Controller voltage failure. Contact your InfoPrint
service representative.
086 CONTROL 15V CHECK*
SEE USERS MANUAL
No Controller voltage failure. Contact your InfoPrint
service representative.
087 PLATEN OPEN
TIMEOUT
CLOSE PLATEN
Yes The platen lever has
been open for at least
one minute. Lower (close) the platen
lever.
088 CONTROL 23.5V
CHECK*
SEE USERS MANUAL
No Controller voltage failure. Contact your InfoPrint
service representative.
089 RIBBON STALL
CHECK TRANSPORT
Yes The controller board
does not detect ribbon
movement. Make sure the ribbon is
not twisted and the platen
lever is set to match
thickness of media being
used. If fault reoccurs,
contact your InfoPrint
service representative.
Table 8: Fault Messages
Fault Message
Operator
Correctable?
Explanation Solution