InfoPrint 6500 DBCS, Руководство пользователя

Страница: 151 / 230

Fault Correction Procedure
151
B21 STATUS:
PRINTER RESET
N/A Status message
informing the operator
that the printer is
undergoing a system
reset. No action required.
B22 ERROR:
DECOMPRESS SIZE*
No Flash memory has not
passed boot initialization
tests. Contact your InfoPrint
service representative.
B23 ERROR:
DECOMPRESS CKSUM*
No Flash memory has not
passed boot initialization
tests. Contact your InfoPrint
service representative.
B30 - STATUS:INITIALIZING N/A Status message
informing the operator
that software is being
downloaded through one
of the printer’s I/O ports
using the two-key
download activation. No action required.
B35 STATUS:
WAITING FOR EC STATUS
Yes Status message: the DC
on the controller board is
waiting for
communication with the
EC. If this message does
not clear within a few
seconds there is an
electrical or electronic
problem on the controller
board. Cycle power. If the
message still appears
contact your InfoPrint
service representative.
B40 ERROR: SDRAM
EEPROM CKSUM BAD* No Flash memory has not
passed boot initialization
tests. Contact your InfoPrint
service representative.
B41 ERROR: DIMM
MEMORY NOT SDRAM*
No The DRAM DIMM
installed on the controller
board is not
Synchronous DRAM
(SDRAM). Contact your InfoPrint
service representative.
B42 ERROR: SDRAM
ROWS NOT ALLOWED*
No Printer boot initialization
tests detect incorrect
SDRAM. Contact your InfoPrint
service representative.
B43 ERROR: SDRAM
TOO MANY BANKS*
No Printer boot initialization
tests detect incorrect
SDRAM. Contact your InfoPrint
service representative.
Table 8: Fault Messages
Fault Message
Operator
Correctable?
Explanation Solution
Fault Messages