InfoPrint 6500 DBCS, Руководство пользователя

Страница: 34 / 230

34
Chapter 3
Using The Operator Panel
Switch Functionality
Fourteen keys are provided for selecting and controlling printer features and
options.
START Use the START key to place the printer in the READY (on-line)
state if it is off-line. Pressing Start in the Program mode exits the
menus and places the printer in the READY state. After pressing
View or Eject to move the print position to the tractor area,
pressing the START key moves the paper back to its original print
position, and places the printer in the READY state.
STOP Use the STOP key to place the printer in the NOT READY
(off-line) state if it is on-line. When a fault condition exists,
pressing STOP clears the fault and places the printer in the NOT
READY state. After pressing VIEW or EJECT to move the print
position to the tractor area, pressing Stop moves the paper back
to its original print position and places the printer in the NOT
READY state.
MENU The MENU key operates only in the NOT READY state and is
used to display the printers control menu. Press MENU
repeatedly to view the menus without changing any settings. No
configuration changes can be made when the Program state is
locked. To change the configuration settings, press the RETURN
and ENTER keys at the same time to unlock the Program state,
then press MENU. The menu is then viewed using the
SCROLL/MICRO, SCROLL/MICRO, and the RETURN and
ENTER keys. When the Program state is unlocked, new values
may be selected from the menus using the ENTER key.
CONFIG (Printer configuration) The CONFIG key operates only in the NOT
READY state. Pressing CONFIG prints the currently selected
configuration. Pressing the STOP key stops printing and returns
to NOT READY.
RETURN The RETURN key operates only in the NOT READY state. In the
Program state, it causes the display to move to a higher level in
the menu structure.
Pressing the RETURN and ENTER keys at the same time
unlocks the ENTER key when in the Program state.
SCROLL/MICRO
Pressing the SCROLL/MICRO key in the READY state has no
effect and returns the message “INVALID KEY PRESS”. In the
NOT READY state, this key micro–steps the paper upward in 1/
72 inch increments. Press and hold the key to move paper at 10
increments per second. In the MENU state, pressing SCROLL/
MICRO navigates the menu and does not move the paper.